MCL 48V 150W rackmount DC UPS

MCL's 48v rackmount DC UPS is a 48V, 150W battery-backed DC power supply, designed to provide a reliable and secure 48 Volt nominal, 3 Amp supply in telecoms and datacoms enclosures.
Call 01702 443810 to book a demo or request trade / bulk order pricing.
Enquire for Price
Shipped From: MCL
Call for Collection / Same-day service

Backorder Lead Time: 21

In Stock Lead Time: 1

Availability: In stock
QuickTag
DC4830RBU

The Mainframe Communications 48V, 150W battery backed DC power supply is designed to provide a reliable and secure 48 Volt nominal, 3 Amp supply in telecoms and datacoms enclosures.

It uses the standby-parallel principle of operation and with its built-in lead accumulator ensures that the DC power supply is reliably maintained in the case of a mains power failure. *The back-up time (depending on the state of charge of the accumulator) is 2 hours at a typical 2 Amp load.

Alarm outputs are provided for the remote monitoring of the AC supply, The DC module health, the battery condition and the status of an external contact.

The internal batteries are maintained at their optimum using a microcontroller-based battery management system which includes bulk and float charging modes and temperature compensation for the charging voltage; this ensures that the battery life is not unduly compromised. The microcontroller also continually monitors the batteries for indications that they have reached the end of their service life and are no longer capable of effectively supplying the load—this is indicated by a flashing battery fault lamp on the front panel, and the closing of the battery alarm contacts. This system ensures confidence in the unit’s ability to take over in the event of a power failure while avoiding the cost of routine premature battery replacement.

Features:

  • 48V, 3A DC Output
  • 115-230 VAC Input
  • 2 Hour Backup Time*
  • 19” Mounting
  • 2U High
  • Temperature-Compensated Charging
  • Alarm Outputs
  • Battery Condition Monitoring

 

Specifications:

Input parameters

 

Mains voltage

85…264Vac

Frequency

47…63Hz

Current surge when connecting to 230V mains

max. 40A

Power coefficient

>0.93

Efficiency

85%

Leakage current

max 2mA

Output parameters

 

Number of outputs

4

Output fuses – accessible

2AF (5x20mm)

Output voltage *1)

42V…55.7V

Nominal, total output current *2)

3A

Current limitation *2)

min 3.2A

Internal battery supervision

 

Battery – VRLA

48V/7.0Ah

Floating mode voltage at temperature of 25°C

54.2V

Bulk charging voltage at temperature of 25°C

55.7V

Temperature dependency *3)

-96mV/°C

Battery charging current – max.

0.65A

Battery charging time of up to 80% of its capacity

10h

Discharged battery disconnection

42V

Battery fuse – accessible

4AF (5x20mm)

Max. battery circuit resistance (indication)

>600 mΩ

External battery

 

Nominal battery voltage

48V

Battery fuse

4AF (5x20mm)

Indications

 

Relay indication – NC terminals accessible on indication connector

- power failure

- battery fuse blown, no battery or battery resistance too high

- rectifier faulty

- external alarm indication (door open)

15V/1A, 30V/1A, 60V/0.5A at resistive load

External alarm input (ext.) – short circuiting with potential-free terminals required

load as above.

LED indication on the front panel

- mains on (AC good)

- rectifier OK (DC good)

- battery fault (BATTERY internal FLT):

- no battery or battery fuse blown

- battery resistance too high (battery needs to be exchanged)

 

 

on (G)

on (G)

 

on (Y)

blinking (Y)

 

Dimmensions:

Dimensions – 19”

- height

- length (unit only, without connectors)

 

88mm (2U)

300mm

Weight (including battery)

< 14kg

Ingress protection

IP20

Indication connectors (sockets)

D-SUB-15

Output connectors

Molex Mini-Fit Sr 4pin/10mm

External battery connector

Molex Mini-Fit Sr 2pin/10mm

External alarm connector

Phoenix FFKDSA/H1-7.62

Output and battery fuses

5x20mm

Mains power

IEC C14

Standards

EN 61000-3-2 Class A, CE Marked

More Information
Rating 150W
Mounting Rack
Enable Hide Price No
Write Your Own Review
You're reviewing:MCL 48V 150W rackmount DC UPS